HVNLY NIGHTS - Sizing Measurements - Non Piercing Body Jewelry

Measurements can be in either centimeters or inches, weight in either pounds or kilograms.

Remember that all measurements should be taken comfortably, not tight or snug. Since the jewelry is made of silver, it does not expand or stretch with your movement like fabric does. The items should fit closely, but still have enough room for you to move naturally.

Ball Fetters
by Arabesque

Around the scrotum

The easiest way to get this measurement is to imagine the a clock over the entire area as it would appear to someone looking at you. It would appear upside-down to you as you look down at yourself.

Place a piece of string at the 10:00 position, wrap it under the balls and back up to the 2:00 position. Mark your string at these 2 positions.

Measure your string where you marked it. You should probably take this measurement several times, to make sure you've done it correctly. Average measurements are between 6" and 7-1/2".

You can adjust the ball fetters along the cock circlet to tighten or loosen them just a little, so don't worry about it being perfect.

Through the middle

Place a piece of string just under the penis, where it connect to the ball sack. Run it between your balls to the farthest part underneath them, where the sack attaches to the body. Again, make sure it isn't too tight.

Mark the string at these 2 places, and measure. Average measurements are between 4" and 6".

Silver & Crystal Bra & Panties
by Arabesque

Measurements for the Halter Bra:
1) Chest measurement underneath the breasts (measured with breath held for expanded chest measurement) 2) Measurement over the fullest part of the breasts 3) Bra size generally worn 4) Length from nape of the neck (the bone at the back of your neck) around the front and down to the nipple. 5) Width of back from outside edge of breast around the back to the other breast 6) Height and weight.

Measurements for the Crotchless & G-String Panties:
1) Hip measurement at widest point. 2) Waist measurement 3) Length from waist to hip at side of body 4) Length from waist in center front, under the crotch to the dimple at top of derriere cheeks in back. 5) Measurement from waist in center front to crotch ( where the inseam would be on a pair of pants) 6) Measurement from the crotch (inseam) to the derriere dimple. 7) Height and weight.

Non Adjustable Penis Rings
by Ring That Thing

(these instructions can also be used to measure for the Love Bump by Arabesque.)

Measurements are best taken in millimeters
Thing Rings ring should fit snuggly, but not so tight that it is constricting.
Love Bumps can be made to be either tight & constricting, or snug & comfortable.

Wrap the string around your "THING". Measure in millimeters the length of the string it took to wrap once...DO NOT include any overlap!

If you will be wearing the ring at the base of the penis measure there, instead of just behind the head.

For rings worn when flacid, measure yourself when you are cold and smallest. You want the ring sized for your SMALLEST size so that it won't come off.

For rings worn when erect, measure yourself when you are about half erect, if you want to wear constrictingly tight; or measure when you are abour 3/4 erect, if you want to wear your ring comfortabely snug.

For Thing Rings, find your string length in the chart below, and order the diameter shown in the column to the right.
Thing Rings can be resized for $6, if the wrong size is chosen.

For Love Bumps, send us the exact measurement of the string.
Love Bumps cannot be resized.

If your string length is...	Order this diameter
62.0mm-68.0mm	18.0mm
69.0mm-74.0mm	20.0mm
75.0mm-81.0mm	22.0mm
82.0mm-87.0mm	24.0mm
88.0mm-93.0mm	26.0mm
94.0mm-99.0mm	28.0mm
100mm-106mm	30.0mm
107mm-112mm	32.0mm
113mm-118mm	34.0mm
119mm-124mm	36.0mm
125mm-131mm	38.0mm

To convert inches to Millimeters multiply your inch measurement by 25.4
Example: 3.0 inches x 25.4 = 76.2mm